Serving Pretoria & JohannesburgMembrane waterproofing · Written quotes after a site visit

Waterproofing questions for Pretoria and Johannesburg

Answers about torch-on and liquid systems, flat and metal roofs, balconies, basements, showers, pools, the summer storm season and what a written quote includes.

Systems and roofs

What is the difference between torch-on and liquid rubber?

Torch-on is a bitumen membrane supplied in rolls and bonded with heat, with overlapping laps. Liquid rubber is applied wet in several coats, often with reinforcing fabric, and cures into a seamless layer. Torch-on suits many concrete slabs; liquid systems suit metal roofs, complex details and places where a flame is unsafe.

Compare the two systems →
Which is better for a flat concrete roof?

Many concrete slabs suit torch-on, especially large, simple areas. A liquid system can be better on small roofs with many pipes or mounts, or where heat is a risk. Sometimes both are used together. The falls, outlets and existing membrane decide it, so we choose on site.

Flat roof waterproofing →
Can you waterproof a metal or IBR roof?

Yes, if the sheeting is sound. Leaks on metal roofs usually come from laps, fixings and penetrations, and a liquid system with reinforcement at those points can seal them without heat. If sheets are rusted through or badly damaged, they need replacing first, which is a roofing job.

Liquid rubber waterproofing →
Are broken roof tiles a waterproofing job?

No. Replacing broken, slipped or missing tiles, re-sheeting and new flashings are roofing work. We install membranes and liquid systems on roofs that are staying in place. If we find the covering itself has failed, we will tell you so you can call a roofer.

Why does water stand on my flat roof?

Usually the falls are too shallow, the slab has sagged or the outlets sit slightly too high or are blocked. Standing water wears a membrane faster and finds weak laps. Correcting the falls with a screed or reworking outlets is often part of the waterproofing scope.

Falls and ponding →
Can new waterproofing go over the old membrane?

Sometimes. If the existing layer is well bonded and dry underneath, repairs and an overlay may suit. If it is blistered, lifting or holding water, it usually has to be removed first, or the new system inherits the problem. We test the old layer before recommending either.

When is it a bad idea to torch a new membrane over the old one?

An overlay is a poor choice when the old membrane is blistered, lifting or holding water. In those cases the old layer usually has to be removed first, otherwise the new membrane can inherit the same problem. An overlay may suit only if the existing layer is well bonded and dry underneath. We test the old layer before recommending either route and explain the reasoning in the written scope. Whether a particular roof can be overlaid is decided on site, not from a photo alone.

Torch-on waterproofing →

Balconies, showers and pools

Why is the stain in the room below the balcony?

Water that gets past the tiles should be stopped by the membrane underneath. When the membrane fails, or water bypasses it at an outlet, threshold or wall junction, it travels through the slab and appears on the ceiling below, often away from the actual entry point.

Balcony waterproofing →
Do the tiles have to come up to fix a balcony?

Not always. A leak at the outlet or a sliding-door threshold can sometimes be repaired locally. If the membrane under the tiles has failed across the balcony, lifting the tiles and installing a new membrane is usually the only reliable repair. The quote will say which applies.

What has to happen before shower tiles go back?

The screed must have its falls to the drain, the surfaces must be sound and dry, and the membrane must be applied with reinforcement at corners, the floor-wall junction, the drain and every tap or niche. Each coat needs to cure before the tiler starts.

Shower waterproofing →
How do I know if my pool is leaking?

Try a bucket test: stand a bucket of pool water on the pool step and compare its water loss with the pool’s over a day or two. If the pool loses noticeably more, there is likely a leak. We then look at the shell and finish; pipework leaks are for a pool specialist.

Pool waterproofing →

Basements and below ground

Is a wet basement a waterproofing or a damp-proofing problem?

Water seeping or running into a basement, especially after rain, is usually a waterproofing problem that needs tanking or a membrane. Moisture rising slowly through the base of an above-ground wall is a damp-proofing problem for a damp specialist. The inspection tells the two apart.

Basement waterproofing →
What is tanking?

Tanking is a continuous waterproof layer around a below-ground space, across the walls, the floor and the junction between them, so water cannot get in even under some pressure. It must be detailed at every pipe and drain that passes through it.

Tanking →
Can a basement be waterproofed from the inside?

Yes, with systems designed to resist water pushing through from behind, such as cementitious or crystalline coatings, or a cavity drainage membrane leading water to a sump. Where the soil side can be reached, waterproofing there is usually more effective. We explain the limits of each option.

Do retaining walls need waterproofing?

A retaining wall that holds back wet soil benefits from a membrane on the soil side, drainage behind it and outlets or weep holes so water pressure does not build up. Where the wall forms part of a room, it is treated like a basement wall.

Retaining walls →

Weather, quotes and areas

When is the best time to waterproof in Gauteng?

The dry months, roughly May to September, are ideal for roofs and balconies, because most systems need a dry surface and dry days to cure. Work during the summer rains is possible but planned around the forecast, and storms can cause delays.

Why balconies leak after storms →
Do you give quotes without a visit?

We are happy to look at photos first and talk through the problem, but we only give a written quote after a site visit. Size, access, the existing system and the condition of the surface all change the work, and we would rather quote accurately.

How a quote works →
What does your written quote include?

The likely cause, the system or product proposed and why, the area, the preparation and repairs, how outlets, upstands, thresholds and penetrations are finished, what is excluded, and any guarantee offered with its terms in writing.

How it works →
Is there a fee for the site visit?

Any visit fee or travel conditions are confirmed with you before we come out, so you know in advance. Ask when you enquire.

Which areas do you cover?

We work in Pretoria and Johannesburg, for homes, complexes, estates and business premises. Send your suburb with your enquiry and we will confirm availability. Centurion enquiries are welcome, subject to availability.

See service areas →
Do you work with body corporates and managing agents?

Yes. In complexes, balconies and roofs are often common property. Tell us who approves the work and we will send the findings and written scope to the trustees or managing agent, and plan access with the owners involved.

How do I request a quote?

Use the form on the contact page. Include your suburb, what is leaking, when you see the water and a few photos if you have them. We will reply to arrange a site visit.

Go to the contact page →
Will you tell me if waterproofing is not the answer?

Yes. If the inspection points to a plumbing leak, condensation, a broken roof covering or damp rising through a wall, we will explain that rather than quote for waterproofing that will not solve the problem.

Still have a question?

Send your suburb, what is leaking and a few photos, and we will reply.

Request a quote