Serving Pretoria & JohannesburgMembrane waterproofing · Written quotes after a site visit

Liquid rubber waterproofing in Pretoria and Johannesburg

Liquid rubber waterproofing is a cold-applied membrane that is brushed, rolled or sprayed on and cures into a seamless layer. The Waterproof Company uses liquid systems in Pretoria and Johannesburg on metal and IBR roofs, around awkward details and anywhere a torch is not the right tool. The system, coats and reinforcement are set out in a written quote.

Request a quote

What liquid rubber is

“Liquid rubber” is a common name for several families of liquid-applied waterproofing. The main ones are water-based acrylics, bitumen-based (often rubber-modified) emulsions and polyurethanes, plus cementitious coatings for some below-ground and wet-area uses. They differ in flexibility, UV resistance, foot-traffic tolerance and what they bond to.

Most are applied in two or more coats, with a reinforcing fabric bedded into the first coat at joints, cracks, laps and corners. Once cured, the membrane has no seams for water to find.

Metal and IBR roofs

On IBR, Chromadek and corrugated roofs that are otherwise sound, leaks often come from side laps, end laps, fixings and penetrations. A liquid system with reinforcement over those points can seal them without heat, which is not usually appropriate on metal roofs.

Rust is treated before coating. If the sheeting is rusted through or badly damaged, that is a roofing replacement rather than a waterproofing job, and we will say so.

Complex details and no-flame situations

Liquid systems flow around shapes that rolls cannot follow neatly: clusters of pipes, small outlets, solar mounts, gutters with many corners, and junctions between different materials. They are also used where an open flame would be a risk, such as next to timber or on top of some existing coatings. On a flat roof they are sometimes combined with torch-on waterproofing across the open areas.

UV topcoats as part of the system

Some liquid systems need a UV-resistant or reflective topcoat to protect the waterproofing layer from the Highveld sun. That topcoat is part of the waterproofing system and should be named in the quote. It is not a decorative coat, and it is not chosen for its colour.

Preparation and curing

Liquid membranes need a clean, sound and usually dry surface, the right primer and enough dry weather to cure between coats. Film thickness matters: too thin and the membrane will not perform as designed. The quote should state the number of coats, the reinforcement and the expected curing conditions.

For roofs in general, see roof waterproofing; for drainage and ponding, see flat roof waterproofing.

Balconies, decks and gutters

Some liquid systems are made to take foot traffic and can be used on exposed concrete balconies, walkways and roof decks, with a textured finish for grip. Others are designed to go under tiles. Liquid systems are also useful for lining box gutters with many corners and outlets. For leaks below a balcony, see balcony waterproofing.

Whichever product is used, it should be one that is intended for the way the area is used, and the quote should say so.

Common questions

Is liquid rubber better than torch-on?

Neither is better everywhere. Liquid systems suit metal roofs, complex details and no-flame situations; torch-on suits many concrete slabs. Our guide torch-on or liquid rubber compares them.

Can liquid rubber go over an existing membrane?

Some products can, after testing adhesion and repairing defects. Others cannot. We check compatibility on site before recommending an overlay.

Does it need dry weather?

Yes. Most liquid systems need a dry surface and no rain until each coat has cured. In the summer rainy season we plan around the forecast.

Which brand do you use?

We choose the system for the job and name the product in the written quote, so you can read the manufacturer’s information before you agree.

Related waterproofing services

Roof waterproofing

Membrane and liquid systems for concrete slabs and sound metal or tiled roofs, with the outlets and upstands detailed properly.

Roof waterproofing →

Torch-on waterproofing

Heat-bonded bitumen membranes for slabs, parapets and box gutters, laid with sound laps and upstands.

Torch-on waterproofing →

Liquid rubber waterproofing in Pretoria and Johannesburg

We carry out liquid rubber waterproofing for homes, complexes and business premises across both cities. See waterproofing in Pretoria and waterproofing in Johannesburg for local conditions, or check the service areas page for suburbs.

To get started, request a quote with your suburb, a short description and a few photos. We arrange a site visit and send a written scope before any work is agreed.

Request a waterproofing quote

Send your suburb, what is leaking and a few photos. We arrange a site visit and set out the work in a written quote.

Request a quote